Keep dated fork and shock pressure, sag measurements, rebound, compression and ride notes with exact OEM setup references. Calculate measured sag and download CSV.
Published and reviewed .
Sag (%) = measured compression ÷ corresponding travel or stroke × 100. For example, an actual 30 mm compression measurement on a 150 mm fork gives 20% sag. This arithmetic example is not a target. Blank pairs produce no percentage; negative measurements, zero travel or compression beyond travel are rejected.
The log does not fetch manuals, verify OEM references, enforce model-specific pressure limits or recommend click settings. A pump maximum is not a component pressure limit. Follow the exact manual and use compatible equipment. This is a routine setup record, not an internal-service guide, service certification, riding approval or medical advice.
Entries stay only in this open page. They are not stored in local storage or an account and will be lost on reload. Download CSV before leaving. Pressure fields use psi; leave them blank for coil components or unrecorded pressures.
0 recorded entries
Identify your component and OEM reference, then add a measured setting or a dated ride note. Sag percentages appear only for a complete measured pair.