What height is a Canyon Endurace size M for?

The sourced Endurace CF 7 product-4274 chart lists M for 177-184 cm rider height. M has 590 mm frame stack, 378 mm reach and a 553 mm top tube. Confirm the exact product and use Canyon's PPS with your inseam.

Should I choose Endurace S or M at 177 cm?

The official S and M height ranges meet at 177 cm. M is 22 mm taller in frame stack and 3 mm longer in reach. Use inseam, saddle adjustment and your desired bar position to decide; height alone does not settle the boundary.

Do all Canyon Endurace CF 7 sizes have the same wheels?

No. Product 4274's component geometry lists 27.5-inch wheels for 3XS and 2XS and 28-inch wheels from XS to 2XL. Check the exact bike's specification before buying replacement wheels or assuming the smaller frame uses the same wheel format.

Canyon Endurace CF Size Chart & Geometry

Jump to the frame geometry table

Endurace CF sizing needs its own chart, not an Aeroad size copied across. On the sourced CF 7, M has 590 mm frame stack and 378 mm reach. The smallest two sizes also use different wheels from the rest of the range. Check the exact CF model before you compare a used listing or choose between S and M.

Which bike does this chart cover?

Endurace CF 7, Canyon product 4274, captured November 4, 2026. No model year is inferred from the export's download date. This is not a universal chart for Endurace AL, CF SLX, CFR or Endurace:ON. Product 2855 has matching frame stack/reach but different published top-tube values, so its measurements are not mixed into this table.

View the manufacturer's geometry chart

Source captured 2026-11-04; reviewed 2026-11-04.

Canyon Endurace CF frame geometry by size

Canyon Endurace CF official-source geometry; all lengths in millimeters
Frame size	Stack (mm)	Reach (mm)	Top tube (mm)
3XS	510	350	501
2XS	529	354	511
XS	548	370	532
S	568	375	543
M	590	378	553
L	611	387	568
XL	637	405	594
2XL	656	414	609

3XS
Stack (mm)
510
Reach (mm)
350
Top tube (mm)
501
2XS
Stack (mm)
529
Reach (mm)
354
Top tube (mm)
511
XS
Stack (mm)
548
Reach (mm)
370
Top tube (mm)
532
S
Stack (mm)
568
Reach (mm)
375
Top tube (mm)
543
M
Stack (mm)
590
Reach (mm)
378
Top tube (mm)
553
L
Stack (mm)
611
Reach (mm)
387
Top tube (mm)
568
XL
Stack (mm)
637
Reach (mm)
405
Top tube (mm)
594
2XL
Stack (mm)
656
Reach (mm)
414
Top tube (mm)
609

Captured from the Basic geometry table for Endurace CF 7, product 4274. Frame Stack and Reach are used, not Stack+, Reach+ or Effective Stack/Reach. Product 2855 has matching frame stack/reach but different published top-tube entries; those charts are not combined. The download date does not establish a model year.

Endurace S vs M

M adds 22 mm frame stack and only 3 mm reach over S, while its top tube is 10 mm longer. Canyon's height ranges meet at 177 cm. Compare the saddle height and hood position each build can achieve; choosing the larger frame simply because it is an endurance bike can leave you with too much height or length.

Use this CF 7's height ranges

The source lists 3XS at 158 cm or below, 2XS at 158-164 cm, XS at 164-170 cm, S at 170-177 cm, M at 177-184 cm, L at 184-191 cm, XL at 191-197 cm and 2XL at 197 cm or above. The end ranges remain subject to fit and component limits. Confirm your inseam through Canyon's PPS rather than treating every Endurace as identical.

Check wheels and measurement definitions

The component table lists 27.5-inch wheels on 3XS and 2XS, then 28-inch wheels from XS upward. It also publishes Stack+, Reach+ and Effective Stack/Reach separately from frame Stack/Reach. This guide uses only the frame figures; neither a wheel-size label nor an effective cockpit number should replace them in a frame comparison.