Rider-matched picks
Grips & Bar Tape for e-bike riders
Size-matched grips & bar tape picks for e-bike riders, with fit and feature priorities curated for how e-bike riders actually ride.
Grips & Bar Tape picks for e-bike riders
Check Amazon for current pricing and availability.
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Sponsored
Cinelli
Cinelli Caleido Cork Tape
Standard drop-bar tape 23.8mm. 2m roll. Classic Italian aesthetic with natural materials.
$33.004.6
View on Amazon
Ergon
Ergon GP1 Ergo Grip
Flat bar 22.2mm diameter. 130mm length with aggressive ergonomic molding for hand support.
$43.504.7
View on Amazon
Fifty Fifty
Fifty Fifty FIFTY-FIFTY Double Lock-On MTB Grips
Standard 22.2 mm (7/8") bar diameter - fits any MTB or hybrid flat bar. The double lock-on design (two clamps per grip) is more secure than single-clamp grips when running soft compounds or riding in wet conditions. Direct alternative to Ergon GA2 or ODI Ruffian.
$25.99
View on Amazon
Fifty Fifty
Fifty Fifty FIFTY-FIFTY Single Lock-on MTB Grips
Single-clamp design saves ~25 g per pair vs the Double Lock-On version and lets the outboard end taper - some riders prefer the comfort. Same 22.2 mm bar fit. Slightly thicker (32 mm vs 31 mm) than the Double Lock-On for riders with bigger hands.
$22.99
View on Amazon
Fifty Fifty
Fifty Fifty FIFTY-FIFTY Alloy Bar Ends 110mm
Bolts to the outboard end of a standard 22.2 mm MTB flat bar - install requires sliding the grip inboard or shortening the bar by ~20 mm per side. Adds a climbing position useful on long hardtail climbs. Not compatible with bars that already use lock-on grips with outboard clamps; pair with the Single Lock-on Grips above for the cleanest fit.
$21.99
View on Amazon
Firmstrong
Firmstrong Padded Handlebar Grips
Pick the single-speed pair for bikes without grip-shifters; pick the 7-speed pair (one shorter grip) for any bike with a twist or trigger shifter on the right. Only fits 22.2mm bars - won't fit drop bars or oversized 31.8mm flat bars.
$19.994.1
View on Amazon
Fizik
Fizik Tempo Microtex Bondcush
Standard drop-bar tape 23.8mm diameter. 2m roll for full handlebar.
$34.994.4
View on Amazon
Lizard Skins
Lizard Skins DSP Bar Tape
Standard drop-bar tape for 23.8mm bars. 2m coverage for typical road bike handlebars.
$20-304.7
View on Amazon
Odi
ODI Mountain Grip Lock-On
Flat bar 22.2mm diameter. 130mm standard length. Budget-friendly lock-on system.
$14-204.6
View on Amazon
Sram
SRAM DH Performance Grip
Flat bar 22.2mm diameter. 130mm standard length. Designed for downhill and aggressive riding.
$23.484.6
View on Amazon
Supacaz
Supacaz Super Sticky Kush Bar Tape
Standard drop-bar tape 23.8mm bars. 2m roll with high tack finish.
$41.994.6
View on Amazon
As an Amazon Associate we earn from qualifying purchases. This helps support our free calculators.
What matters for e-bike riders
E-bikes weigh 20-30 kg compared to 8-12 kg for acoustic bikes, which fundamentally changes how sizing affects handling. The extra weight actually improves stability at speed but makes low-speed maneuvering and stopping more critical - ensure you can confidently put both feet flat on the ground when stopping, especially if you're new to cycling. Step-through frames are strongly recommended for riders with any flexibility limitations, as swinging a leg over a heavy e-bike is significantly harder than a standard bicycle. Mid-drive motors (Bosch, Shimano, Brose) center weight low near the bottom bracket, providing better balance than hub motors which place weight in the wheel. Battery placement (downtube integrated vs rear rack) also affects weight distribution - integrated downtube batteries provide the most natural handling. When sizing, use the same frame size you'd ride on an acoustic bike of the same type - e-road bikes size like road bikes, e-MTBs size like mountain bikes. The motor assist actually makes sizing slightly more forgiving, as you're less reliant on optimal pedaling efficiency.
Grips & Bar Tape sizing guidance
Drop-bar tape: 2m roll covers a standard handlebar. Flat-bar grips: 130mm length is standard, 90-100mm for inner-bar setups with shifters. Confirm bar diameter (drop 23.8mm, flat 22.2mm).
Expert tips
- Size your e-bike the same as you would the acoustic version - a Trek Rail sizes like a Trek Fuel EX
- Step-through frames aren't just for seniors - they're practical for anyone who stops frequently in traffic
- Mid-drive motors (Bosch, Shimano, Specialized) provide the most natural pedal feel and better hill climbing
- Test ride with the battery fully charged AND nearly empty - the bike handles differently with 3-4 kg less weight
Grips & Bar Tape head-to-head comparisons
Cross-shop the grips & bar tape e-bike riders actually consider - specs, fit, and the deciding factor.